i-290 2WD L4-2.9L (2008)
1. Hook the body rear trim panel in the sheet metal along the lower edge of the rear window.
2. Install the panel by pushing firmly against the body to seat the panel fasteners.
3. Install the rear shoulder belt guide.
4. Install the jack and tool storage bracket. Refer to Jack and Tool Stowage Container Bracket Replacement (Regular Cab) (See: Jack and Tool
Stowage Container Bracket Replacement (Regular Cab)) .
5. Install the rear seat. Refer to Rear Bench Seat Replacement (See: Seats/Service and Repair/Rear Bench Seat Replacement) .
Body Rear Trim Panel Replacement (Extended Cab)
Body Rear Trim Panel Replacement (Extended Cab)
Removal Procedure
1. Remove the rear seat back. Refer to Rear Seat Back Replacement (Crew Cab) (See: Seats/Seat Back/Service and Repair/Rear Seat Back
Replacement (Crew Cab))Rear Seat Back Replacement (Extended Cab) (See: Seats/Seat Back/Service and Repair/Rear Seat Back Replacement
(Extended Cab)) .
2. Remove the folding seat. Refer to Folding Seat Replacement (Extended Cab) (See: Seats/Service and Repair/Folding Seat Replacement (Extended
Cab)) .
3. Remove the jack and tool storage bracket. Refer to Jack and Tool Stowage Container Bracket Replacement (Regular Cab) (See: Jack and Tool
Stowage Container Bracket Replacement (Regular Cab)) .
4. Remove the rear shoulder belt guide.