isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Body Hinge Pillar Trim Panel Replacement - Left Side|Page 18766 > < Body Hinge Pillar Trim Panel Replacement - Left Side|Page 18764
Page 17
background image

1. Remove the screw securing the jack cover to the jack stowage bracket.
2. Remove the jack cover by lifting up to release the tab from behind the jack stowage bracket.

Installation Procedure

1. Position the jack cover over the jack stowage bracket ensuring that the tab on the rear of the cover hooks behind the top of the jack stowage

bracket.

2. Install the screw securing the jack cover to the jack stowage bracket. 

Tighten the jack cover screw until fully seated, tight, but not stripped.

Rear Side Door Latch Striker Cover Replacement (Extended Cab)

Rear Side Door Latch Striker Cover Replacement (Extended Cab)

Removal Procedure

1. Open the rear door.

Body Hinge Pillar Trim Panel Replacement - Left Side|Page 18766 > < Body Hinge Pillar Trim Panel Replacement - Left Side|Page 18764