i-290 2WD L4-2.9L (2008)
8. Install the cam plate (2).
9. Install the cam plate screws (1).
Tighten the cam plate screw to 3 N.m (27 lb in).
10. Manually close the sunroof window to the sunroof module assembly on the bench.
11. Clean the outside area of the upper sunroof frame with GM(TM) Glass Cleaner for vehicles built without adhesive under the sunroof frame. If the
sunroof frame has adhesive applied to the frame, use masking tape to clean the frame and seal.
