i-290 2WD L4-2.9L (2008)
11. Install the 2 bolts (1) securing the seat back and recliner assemblies to the seat adjuster.
12. Install the front, rear, and side J-strips (1, 2) to the underside of the seat.
13. Install the switch bezel. Refer to Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement (See: Service and Repair/Driver Seat and
Passenger Seat Adjuster Switch Bezel Replacement) .
14. Install the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seat Cushion/Service and Repair/Seat
Cushion Outer Trim Panel Replacement) .
15. Install the seat back recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement (See: Service and Repair/Driver Seat
and Passenger Seat Recliner Handle Replacement) .
16. Install the seat in the vehicle. Refer to Front Seat Replacement - Bucket (See: Service and Repair/Front Seat Replacement - Bucket) or Split
Bench Seat Replacement (See: Service and Repair/Split Bench Seat Replacement) .