isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement|Page 19244 > < Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement|Page 19242
Page 2
background image

14. Disconnect the electrical connector for the seat back heating element, located near the seat belt retractor, if equipped.
15. Carefully remove the seat back pad from the seat back frame.
16. Remove the seat back heater element. Refer to Driver Seat and Passenger Seat Back Cushion Heater Replacement  (See: Seat Heater/Service and

Repair/Driver Seat and Passenger Seat Back Cushion Heater Replacement) .

Installation Procedure

1. Install the seat back heater element. Refer to Driver Seat and Passenger Seat Back Cushion Heater Replacement  (See: Seat Heater/Service and

Repair/Driver Seat and Passenger Seat Back Cushion Heater Replacement) .

2. Position the seat back pad to the seat back frame.
3. Connect the electrical connector to the seat back heating element, if equipped.
4. Partially install the seat back cover over the top of the seat.
5. Install the head restraint guides to the seat frame. Ensure that the locking tabs are fully seated. The guide with the release tab goes on the

right-hand side.

6. Install the hog rings that retain the seat back pad to the reinforcement bar.

7. Pull the seat cover (1) over the seat back pad (3).
8. Press the seat cover hook and loop retaining strips (2) together by firmly running your hand over the seat back cover (1).

9. Install the J-strip (1) across the bottom of the seat back cover.

10. Install the head restraint. Refer to Front Seat Head Restraint Replacement  (See: Head Rest/Service and Repair/Front Seat Head Restraint

Replacement) .

11. Install the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement  (See: Seat Cushion/Service and Repair/Seat

Cushion Outer Trim Panel Replacement) .

12. Install the seat back release handle. Refer to EZ Entry Seat Manual Release Knob Replacement  (See: Service and Repair/EZ Entry Seat Manual

Release Knob Replacement) .

13. Install the seat in the vehicle. Refer to Split Bench Seat Replacement  (See: Service and Repair/Split Bench Seat Replacement) or Front Seat

Replacement - Bucket  (See: Service and Repair/Front Seat Replacement - Bucket) .

Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement|Page 19244 > < Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement|Page 19242