i-290 2WD L4-2.9L (2008)
Seat Back: Service and Repair
Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement
Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement
Removal Procedure
1. Remove the seat from the vehicle. Refer to Split Bench Seat Replacement (See: Service and Repair/Split Bench Seat Replacement) or Front Seat
Replacement - Bucket (See: Service and Repair/Front Seat Replacement - Bucket) .
2. Remove the front seat back cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (See: Front Seat Back Cushion
Cover and Cushion Pad Replacement) .
3. Remove the 2 hog ring fasteners (3) on the bottom of the seat back panel (2).
4. Remove the push-pin fastener (1) from the top of the seat back panel.
5. Remove the seat-back panel.
Installation Procedure
1. Position the seat back panel on the seat-back frame.
2. Install the seat back panel to the frame with a push-pin fastener (1) at the top of the panel.
3. Install the 2 hog ring fasteners (3) to the bottom of the seat back panel (2).
4. Install the front seat back cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (See: Front Seat Back Cushion
Cover and Cushion Pad Replacement) .
5. Install the seat in the vehicle. Refer to Split Bench Seat Replacement (See: Service and Repair/Split Bench Seat Replacement) or Front Seat
Replacement - Bucket (See: Service and Repair/Front Seat Replacement - Bucket) .