i-290 2WD L4-2.9L (2008)
1. Install the seat back frame by pushing the frame onto the seat cushion frame stud.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the bolt securing the seat back frame to the seat cushion frame.
Tighten the rear bench seat back frame mounting bolt to 50 N.m (37 lb ft).
3. Install the seat back latch assembly. Refer to Rear Seat Back Latch Replacement (See: Seat Latch/Service and Repair) .