i-290 2WD L4-2.9L (2008)
3. Release the J-strips (1) on the cover.
4. Remove the seat cushion cover and pad from the seat frame (2).
Installation Procedure
1. Install the seat cushion cover and pad over the seat frame (2).
2. Install the J-strips (1) on the cover.
3. Install the seat belt buckles (1) through the seat cover loops (2).
4. Install the rear bench seat in the vehicle. Refer to Rear Bench Seat Replacement (See: Service and Repair/Rear Bench Seat Replacement) .