i-290 2WD L4-2.9L (2008)
Tie Down Hook / Bracket: Service and Repair
Pickup Box Tie Down Loop Replacement
Removal Procedure
Caution: Refer to Approved Equipment for Collision Repair Caution (See: Service Precautions/Technician Safety Information/Approved
Equipment for Collision Repair Caution) .
1. Locate and drill out the spot welds.
2. Remove the tie down loop.
Installation Procedure
1. Prepare all mating surfaces as necessary.
2. Apply GM-approved Weld-Thru coating or equivalent to all mating surfaces. Refer to Anti-Corrosion Treatment and Repair () .