i-290 2WD L4-2.9L (2008)
particles to enter the hydraulic system.
5. Fill the brake master cylinder reservoir to the maximum-fill level with Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or
equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
6. Pressure bleed the hydraulic brake system. Begin the procedure with the pressure bleeder reservoir filled to the maximum-fill level with the correct
brake fluid as indicated. Refer to Hydraulic Brake System Bleeding (Manual) (See: Hydraulic Brake System Bleeding (Manual))Hydraulic Brake
System Bleeding (Pressure) (See: Hydraulic Brake System Bleeding (Pressure)) .