i-290 2WD L4-2.9L (2008)
7. Use the J 44215 with the J 8092 and a hammer to install the crankshaft rear oil seal into the crankshaft rear oil seal housing.
*
Ensure the seal is installed squarely.
*
The seal will bottom out in the housing when fully installed.
8. Install the flywheel. Refer to Engine Flywheel Replacement (with Manual Transmission) (See: Transmission and Drivetrain/Flywheel/Service and
Repair)Engine Flywheel Replacement (with Automatic Transmission) (See: Transmission and Drivetrain/Flex Plate/Service and Repair).
