i-290 2WD L4-2.9L (2008)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Special Tools
*
EN 46547 Flywheel Holding Tool
*
EN-48034 Harmonic Balancer Installer
*
J 41816-2 Crankshaft End Protector
*
J 45059 Angle Meter
Removal Procedure
1. Remove the cooling fan. Refer to Fan Replacement (LLV - 2.9L, LLR - 3.7L) (See: Cooling System/Radiator Cooling Fan/Service and Repair).
2. Remove the drive belt. Refer to Drive Belt Replacement (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair).
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Remove the service slot plug.
Important: The crankshaft balancer does not have a key-way; so the crankshaft could turn when tightening, causing an improper torque.
5. Install the EN 46547 (1) into the flywheel teeth.
6. Lower the vehicle.