i-290 2WD L4-2.9L (2008)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement
Removal Procedure
1. Remove the drive belt. Refer to Drive Belt Replacement (See: Drive Belt/Service and Repair).
2. Remove the left wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair).
3. Remove the air conditioning (A/C) suction hose from the compressor. Refer to Suction Hose Replacement (LLV - 2.9L, LLR - 3.7L) (See: Heating
and Air Conditioning/Hose/Line HVAC/Service and Repair/Suction Hose Replacement).
4. Remove the A/C discharge hose from the compressor. Refer to Discharge Hose Replacement (LLV - 2.9L, LLR - 3.7L) (See: Heating and Air
Conditioning/Hose/Line HVAC/Service and Repair/Discharge Hose Replacement).
5. Remove the bolts securing the drive belt idler pulley to the engine.
6. Remove drive belt idler pulley from the engine.
Installation Procedure