i-290 2WD L4-2.9L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
1. Position the oil filter adapter to the engine block.
Tighten the bolts to 10 N.m (89 lb in).
2. Install the engine oil pressure switch, if previously removed. Refer to Engine Oil Pressure Sensor and/or Switch Replacement (See: Oil Pressure
Sensor/Service and Repair).
3. Connect the engine wiring harness electrical connector (2) to the oil pressure switch (1).
4. Connect the engine wiring harness retainer (3) to the oil filter adapter (4).
5. Install the oil filter. Refer to Engine Oil and Oil Filter Replacement (See: Engine Oil/Service and Repair).
