i-290 2WD L4-2.9L (2008)
9. Install the 4 lower transmission mounting bolts.
Tighten the bolts to 50 N.m (37 lb ft).
10. Install the nuts securing the fuel hose/pipe bracket to the transmission.
Tighten the nuts to 20 N.m (15 lb ft).
11. Install the service slot plug.
12. Install the applicable components:
*
RWD
Install the power steering gear. Refer to Steering Gear Replacement (See: Steering and Suspension/Steering/Steering Gear/Service and
Repair/Steering Gear Replacement).
*
4WD
1. Position the differential carrier assembly to the frame.
