i-290 2WD L4-2.9L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
5. Tighten the exhaust manifold bolts in sequence.
1. Tighten the exhaust manifold bolts in sequence to 20 N.m (15 lb ft).
2. Tighten the exhaust manifold bolts in sequence to 20 N.m (15 lb ft).
3. Tighten the exhaust manifold bolts in sequence to 20 N.m (15 lb ft).
6. Install the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement (LLV - 2.9L) (See: Heat Shield/Service and
Repair/Exhaust Manifold Heat Shield Replacement).
7. Install the exhaust seal. Refer to Exhaust Seal Replacement (See: Seals and Gaskets/Exhaust Pipe Gasket/Service and Repair).