i-290 2WD L4-2.9L (2008)
Heat Shield: Service and Repair
Exhaust Pipe Heat Shield Replacement
Exhaust Pipe Heat Shield Replacement
Removal Procedure
Caution: Refer to Exhaust Service Caution (See: Service Precautions/Exhaust Service Caution) .
Caution: Refer to Protective Goggles and Glove Caution (See: Service Precautions/Technician Safety Information/Protective Goggles and Glove
Caution) .
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the 4 nuts securing the heat shield to the floor panel.
3. Remove the exhaust pipe heat shield from the floor panel.
Installation Procedure