i-290 2WD L4-2.9L (2008)
1. Install the suction hose (4) to the vehicle.
2. Install new sealing washers. Refer to Sealing Washer Replacement (See: Heating and Air Conditioning/Coupler HVAC/A/C Coupler
O-ring/Service and Repair/Sealing Washer Replacement) .
3. Install the suction hose to the TXV.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the nut (4) to the TXV stud.
Tighten the nut to 16 N.m (12 lb ft).