i-290 2WD L4-2.9L (2008)
Maintenance Required Lamp/Indicator: Service and Repair
How to Reset the Engine Oil Life System
The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it
can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL message being turned on,
reset the system.
To reset the Engine Oil Life system, do the following:
1. With the engine off, turn the ignition to ON.
2. Press and release the stem in the lower center of the instrument cluster until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear, press and hold the stem until several beeps sound. This confirms that the oil life system
has been reset.
4. Turn the key to LOCK.
If the CHANGE OIL message comes back on when you start your vehicle, the engine oil life svstem has not reset. Repeat the procedure.
