i-290 2WD L4-2.9L (2008)
*
GMLAN Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/GMLAN Wiring Repairs)
Symptoms - Data Communications
Symptoms - Data Communications
Important: The following steps must be completed before using the symptom tables.
1. Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) before using the symptom tables in order to verify that all of the following are true:
*
There are no DTCs set.
*
The control modules can communicate via the serial data links.
2. Review the system operation in order to familiarize yourself with the system functions. Refer to the following:
*
Data Link Communications Description and Operation (See: Description and Operation)
*
Body Control System Description and Operation (See: Body and Frame/Body Control Systems/Description and Operation)
Visual/Physical Inspection
*
Inspect for aftermarket devices which could affect the operation of the systems. Refer to Checking Aftermarket Accessories (See: Testing and
Inspection/Component Tests and General Diagnostics/Checking Aftermarket Accessories) .
*
Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections (
See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Testing For Intermittent Conditions and Poor Connections) .
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
*
Scan Tool Does Not Power Up (See: Scan Tool Does Not Power Up)
*
Scan Tool Does Not Communicate with Class 2 Device (See: Scan Tool Does Not Communicate With Class 2 Device)
Scan Tool Does Not Communicate with High Speed GMLAN Device
Scan Tool Does Not Communicate with High Speed GMLAN Device
Diagnostic Instructions
*
Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
*
Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
*
Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure Instructions)
provides an overview of each diagnostic category.
Diagnostic Fault Information
Circuit/System Description
Modules connected to the GMLAN serial data circuit monitor for serial data communications on the GMLAN network during normal vehicle operation.
Operating information and commands are exchanged among the modules. The high speed GMLAN serial data buss uses two 120 ohm terminating
