isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Recall 10V575 - Child Restraint Tether Non-Compliance|Page 17521 > < Air Bag(s) Arming and Disarming|Service and Repair|Page 17511
Page 1
background image

Technical Service Bulletin # SB11-11-S001

Date: 110121

Recall 10V575 - Child Restraint Tether Non-Compliance

2011 Service Bulletins
Campaign SB11-11-S001

Issue Date: JANUARY 2011

Child Restraint Top Tether Anchor Not Accessible for Front Center Seating Position FMVSS NONCOMPLIANCE RECALL NO. 10V-575 

AFFECTED VEHICLES

2004-2008 Model Year Isuzu I-Series Truck (TI)

Regular Cab Extended Cab without Rear Seats Equipped with a Front 60/40 Split Bench Seat

SERVICE INFORMATION

CONDITION

General Motors the vehicle manufacturer has decided that certain 2004-2008 model year I-Series regular cab vehicles and extended cab vehicles without
a rear seat and equipped with a front 60/40 split bench seat fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) 225 Child Restraint
Anchorage Systems. The child restraint top tether anchor for the front center seat position in these vehicles is not accessible as required by the Standard.
Without the top tether anchor the child restraint may not be properly secured. FMVSS 225 also requires that the Owner Manual includes a step- by-step
procedure for attaching a child restraint top tether to a vehicle top tether anchor.

CORRECTION

Customers will be mailed an Owner Manual Supplement that describes how to install a child restraint using a top tether in the center position. Isuzu
Service Facilities are to modify the back panel trim cover to allow access to the top tether anchor if requested by the customer.

SERVICE FACILITY RESPONSIBILITY

Whenever a subject vehicle is presented to the Service Facility for service work the Service Facility must take the necessary steps to ensure that this
campaign has been completed prior to releasing the vehicle. Service Facilities are to inspect all eligible vehicles per the procedure attached. Service
Facilities must service all vehicles subject to this Noncompliance Recall at no charge to customers regardless of mileage age of vehicle or ownership
from this time forward if the customer requests the repair.

It is the Service Facility's responsibility to validate the eligibility of each specific vehicle by using the Isuzu Communications System (ICS) isuzuone.com
or by calling the Dealer Support Line.

Service Facilities will also be provided an Affected Vehicle Campaign Report (AW5123) via the Isuzu Communications System. (ICS) This report
contains VIN and detailed owner information obtained from state motor vehicle registration records. The use of such motor vehicle registration data for
any other purpose is not allowed and improper use may violate State and Federal laws.

OWNER NOTIFICATION
Isuzu Motors America LLC will notify customers of this Noncompliance Recall of their vehicles (see copy of typical customer letter included with this
bulletin).

VEHICLES INVOLVED

Involved are certain 2004-2008 model year Isuzu I-Series Truck regular cab vehicles and extended cab vehicles without a rear seat and equipped with a
front 60/40 split bench seat.

PARTS INFORMATION

No parts are required for this recall

SERVICE PROCEDURE

1. Move the driver and passenger seats to the full4orward position.

Recall 10V575 - Child Restraint Tether Non-Compliance|Page 17521 > < Air Bag(s) Arming and Disarming|Service and Repair|Page 17511