i-290 2WD L4-2.9L (2008)
Seat Belt Buckle: Service and Repair
Front Seat Belt Buckle Replacement
Front Seat Belt Buckle Replacement
Removal Procedure
1. Remove the seat from the vehicle. Refer to Front Seat Replacement - Bucket (See: Body and Frame/Seats/Service and Repair/Front Seat
Replacement - Bucket) or Split Bench Seat Replacement (See: Body and Frame/Seats/Service and Repair/Split Bench Seat Replacement) .
2. Disconnect the seat belt buckle electrical connector (1).
3. Remove the bolt (2) securing the seat belt buckle assembly (1) to the seat adjuster.
4. Pull the seat belt buckle assembly (1) out though the opening in the seat cushion.
Installation Procedure