i-290 2WD L4-2.9L (2008)
1. Install the seat belt buckle assembly (1) through the seat cushion pad.
Notice: Refer to Fastener Notice.
2. Install the seat belt buckle assembly (1) to the seat adjuster with the bolt (2).
Tighten the front seat belt buckle bolt to 55 N.m (41 lb ft).
3. Connect the seat belt buckle electrical connector (1).
4. Install the seat from the vehicle. Refer to Front Seat Replacement - Bucket (See: Body and Frame/Seats/Service and Repair/Front Seat
Replacement - Bucket) or Split Bench Seat Replacement (See: Body and Frame/Seats/Service and Repair/Split Bench Seat Replacement) .
