i-290 2WD L4-2.9L (2008)
Notice: Refer to Fastener Notice.
1. Install the 2 bolts securing the rear seat belt shoulder adjuster (1) to the vehicle.
Tighten the rear seat belt shoulder adjuster bolts to 52.5 N.m (39 lb ft).
2. Install the body rear corner upper trim panel (2). Refer to Body Side Upper Trim Panel Replacement (Regular Cab, Extended Cab) (See: Body
and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Body Side Upper Trim Panel Replacement (Regular Cab, Extended Cab)
)Body Side Upper Trim Panel Replacement (Crew Cab) (See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Body
Side Upper Trim Panel Replacement (Crew Cab)) .
3. Install the knob on the rear seat belt shoulder adjuster (1).
4. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten the rear seat belt upper guide bolt to 52.5 N.m (39 lb ft).
5. Install the rear seat belt upper guide shoulder bolt trim cover.