i-290 2WD L4-2.9L (2008)
3. Install the wheel drive shaft into the knuckle.
4. Install the upper control arm/ball joint into the knuckle. Refer to Upper Control Arm Ball Joint Replacement (2WD, Z85, ZQ8) (See: Ball
Joint/Service and Repair/Upper Control Arm Ball Joint Replacement (2WD, Z85, ZQ8))Upper Control Arm Ball Joint Replacement (4WD, 2WD
Z71) () .
5. Install the outer tie rod end into the knuckle. Refer to Rack and Pinion Outer Tie Rod End Replacement (See: Steering/Tie Rod/Tie Rod
End/Service and Repair) .
6. Install the speed senor wiring harness in the retaining clips on the upper control arm and frame.
7. Install the brake caliper mounting bracket. Refer to Brake Caliper Bracket Replacement (See: Brakes and Traction Control/Disc Brake
System/Brake Caliper/Service and Repair/Removal and Replacement/Brake Caliper Bracket Replacement) .
8. Install the wheel drive shaft retaining nut to specifications. Refer to Wheel Drive Shaft Replacement () .
9. Remove the support from the lower control arm.
10. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair)
11. Remove the support and lower the vehicle.