i-290 2WD L4-2.9L (2008)
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair) .
3. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
4. Remove the absorber/spring assembly bolt and nut.
5. Remove the front stabilizer link. Refer to Stabilizer Shaft Link Replacement (ZQ8, Z85) (See: Stabilizer Bar/Stabilizer Link/Service and
Repair/Front Suspension/Stabilizer Shaft Link Replacement (ZQ8, Z85))Stabilizer Shaft Link Replacement (Z71) (See: Stabilizer Bar/Stabilizer
Link/Service and Repair/Front Suspension/Stabilizer Shaft Link Replacement (Z71)) .
6. Remove the absorber/spring assembly from the vehicle.
Notice: Use care when handling the coil springs in order to avoid chipping or scratching the coating. Damage to the coating will result in
premature failure of the coil springs.
