i-290 2WD L4-2.9L (2008)
Transmission Mount: Service and Repair
Transmission Mount Replacement (2WD)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Support the transmission with a transmission jack.
3. Remove the 2 nuts securing the transmission mount to the transmission support.
4. Raise the transmission off of the transmission support.
5. Remove the transmission mount bolts (4).
6. Remove the transmission mount (3).
7. Remove the transmission mount spacer bolts (1).
8. Remove the transmission mount spacer (2).
Installation Procedure