i-290 2WD L4-2.9L (2008)
1. Install the transmission mount to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the mount to transmission bolts.
Tighten the bolts to 55 N.m (41 lb ft).
3. Lower the transmission and install the two nuts (1) securing the transmission mount to the transmission support.
Tighten the nuts to 57 N.m (42 lb ft).
4. Remove the transmission jack.
5. Lower the vehicle.