i-290 2WD L4-2.9L (2008)
1. Install the new washer pump (1) and grommet into the washer solvent container.
2. Use clean washer solvent on the washer pump in order to aid in the installation of the new washer pump into the grommet.
3. Apply downward pressure onto the pump in order to seat the pump to the grommet.
4. Secure the top of the pump to the washer container.
5. Install the washer solvent container. Refer to Windshield Washer Solvent Container Replacement (2nd Design) (See: Windshield Washer
Reservoir/Service and Repair) .
6. Close the hood.