i-290 4WD L4-2.9L (2007)
5. Clean the upper frame as follows, clean around the inside surface and edges with a 50/50 mixture of isopropyl alcohol and water by volume on a
dampened lint free cloth.
INSTALLATION PROCEDURE
1. Install a adhesive sealant bead around the outside (1) of the groove of the upper frame 2 mm ( 1/16 in ) thick.
2. Install a adhesive sealant bead only along the front (2), on the inside of the groove 2 mm ( 1/16 in ) thick.
3. IMPORTANT: Put the seam of the sunroof window seal in the front under the window holder.