i-350 L5-3.5L (2006)
2. Remove the 3 screws (2) located on the lower hinge.
3. Remove the hinge from the vehicle.
Installation Procedure
1. Position the hinge to the console.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 3 screws (2) retaining the armrest to the lower hinge.
Tighten the screws to 1.5 N.m (15 lb in).
3. Install the armrest.
Console Armrest Replacement - Front Floor
Console Armrest Replacement - Front Floor
Removal Procedure
1. Open the console armrest, revealing the lower compartment.