i-350 L5-3.5L (2006)
Jack: Tools and Equipment
Jack and Tool Stowage Container Bracket Replacement
Jack and Tool Stowage Container Bracket Replacement
Removal Procedure
1. Remove the jack stowage cover.
2. Remove the jack from the stowage bracket by turning the jack handle to loosen the jack.
3. Remove the 2 bolts securing the jack stowage bracket to the vehicle.
Installation Procedure
1. Position the jack stowage bracket on the floor stud in the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 2 bolts securing the jack stowage bracket to the vehicle.
Tighten the jack stowage bracket bolts to 9 N.m (79 lb in).