isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Power Locks > < Remote Keyless Entry (RKE) - Operational Characteristics
Page 2
background image

Control Module, Key FOB Information.

^

If the transmitter fails the test with the Kent Moore J-43241 Keyless Entry Tester, replace the batteries and retest the transmitter using the Kent
Moore J43241 Keyless Entry Tester. If the transmitter still fails the test, replace the transmitter.

THE FOLLOWING CLAIM TYPES ARE NOT COVERED UNDER THE VEHICLE WARRANTY:

^

Transmitter replacement when all buttons work, using the Kent Moore J-43241 Keyless Entry Tester.

^

Personalization programming through the DTC or Tech 2.

^

Lost/replacement transmitter reprogramming

^

Used car transmitter replacement programming.

^

Transmitter damage due to misuse, such as any liquid spilled on/in the transmitter or damage from animals chewing on the transmitter, etc.

Broken transmitter cases where the key ring attaches to the case. If the case is broken in this area, it is due to mounting the transmitter direct to the key
ring without the protection of the small ring. The small ring acts like a universal joint/flex joint and helps protect the transmitter from this type of
damage.

Disclaimer

Power Locks > < Remote Keyless Entry (RKE) - Operational Characteristics