i-350 L5-3.5L (2006)
1. Align the front seat cushion outer trim panel to the seat assembly.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 3 seat cushion outer trim panel mounting screws.
Tighten the front seat cushion outer trim panel screws to 1.5 N.m (13 lb in).
3. Install the seat back recliner handle.
Seat Cushion Frame Replacement - Rear (Extended Cab)
Seat Cushion Frame Replacement - Rear (Extended Cab)
Removal Procedure
1. Remove the rear folding seat cushion from the vehicle.
2. Release the J-strips (2) on the cover (1).
3. Remove the seat cushion cover from the seat frame/pad.
Installation Procedure