i-350 L5-3.5L (2006)
^
Excessive corrosion
^
Bent mounting tabs
^
Looseness at the brake caliper mounting bracket
^
Looseness at the disc brake pads
^
Excessive contaminants in the brake caliper mounting bracket surface and threads.
10. If any of the conditions listed are found, the disc brake pad mounting hardware requires replacement.
11. Ensure the disc brake pads are held firmly in place on the brake caliper mounting bracket, yet slide easily on the mounting hardware without
binding.
12. Inspect the caliper bolts (1) for the following conditions:
^
Binding
^
Seizing
^
Looseness in the brake caliper mounting bracket (3)
^
Bent or damaged brake caliper mounting bolts
^
Cracked or torn boots (4)
^
Missing boots
^
Bent or damaged brake caliper mounting bracket (3)
13. If any of the conditions listed are found then the brake caliper mounting hardware requires replacement.
14. Install the brake caliper mounting bracket. Refer to Brake Caliper Bracket Replacement. See: Service and Repair/Brake Caliper Bracket
Replacement
