i-350 L5-3.5L (2006)
6. Install the left brake line to the brake hose.
^
Tighten the fitting to 19 Nm (14 ft. lbs.).
7. Remove the rubber cap or plug from the right brake line.
Important When installing the brake hose or brake line fittings, always finger-tighten the fitting before tightening to specification.
8. Install the right brake line to the brake hose.
^
Tighten the fitting to 19 Nm (14 ft. lbs.).
9. Fill the master cylinder reservoir, if needed.
10. Bleed the brake system.
11. Lower the vehicle.