i-350 L5-3.5L (2006)
15. Remove the remaining engine wiring harness bracket bolt.Remove the bracket from the engine compartment through the wheelhouse opening.
16. Remove the intake manifold bolts.
17. Lower the vehicle.
18. Remove the intake manifold from the cylinder head.
19. Remove the seal from the intake manifold.Discard the seal.
20. Mask off the open ports to the cylinder head, in order to prevent foreign objects from entering the engine.
21. Clean and Inspect the intake manifold. Refer to Intake Manifold Cleaning and Inspection.
Installation Procedure
1. Remove the masking from the cylinder head and ensure the sealing surface is clean and dry.
2. Install a NEW seal into the intake manifold groove.
