i-350 L5-3.5L (2006)
3. Position the intake manifold to the cylinder head.
4. Raise and support the vehicle only high enough to access the following components through the wheelhouse Refer to Lifting and Jacking the
Vehicle:
^
The intake manifold bolts
^
The engine wiring harness bracket bolts
^
The wiring harnesses
5. Notice: Refer to Fastener Notice in Service Precautions.
Install the intake manifold bolts.
Tighten the intake manifold bolts from the inside working outward to 10 Nm (89 inch lbs.).
6. Position the engine wiring harness bracket to the engine and harnesses.
7. Install the engine wiring harness bracket bolts.
Tighten the engine wiring harness bracket bolts to 10 Nm (89 inch lbs.).