i-350 L5-3.5L (2006)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the exhaust manifold heat shield nuts.
^
Tighten the exhaust manifold heat shield nuts to 10 Nm (89 inch lbs.).
4. Install the HO2S to the exhaust manifold.
5. Position the transmission filler tube to the A.I.R. adapter if previously removed.
6. Install the transmission filler tube bracket nut.
^
Tighten the transmission filler tube bracket nut to 12.5 Nm (111 inch lbs.).
7. Install the air cleaner assembly.
8. Install the air cleaner outlet duct.
