isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 8830 > < SIR Disabling and Enabling Zones|Page 8828
Page 2
background image

2. Connect the steering wheel module yellow 4-way connector (2) located left of the steering column above the left hinge pillar trim panel.
3. Install the CPA (1) to the steering wheel module yellow 4-way connector (2) located left of the steering column above the left hinge pillar trim

panel.

4. Install the SIR fuse to the fuse block (1) located in the underhood fuse block.
5. Staying well away from all air bags, turn ON the ignition, with the engine OFF.

1. The AIR BAG indicator will flash 7 times.
2. The AIR BAG indicator will then turn OFF.

6. Perform the Diagnostic System Check - Vehicle, if the AIR BAG indicator does not operate as described.

SIR Disabling and Enabling Zones|Page 8830 > < SIR Disabling and Enabling Zones|Page 8828