isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Malfunction Indicator Lamp > < Maintenance Required Lamp/Indicator|Description and Operation
Page 1
background image

Maintenance Required Lamp/Indicator: Service and Repair

Engine Oil Life System 

When to Change Engine Oil

Your vehicle has a computer system that lets you know when to change the engine oil and filter. This is based on engine revolutions and engine
temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change will be indicated can vary considerably. For the oil life
system to work properly, you must reset the system every time the oil is changed.

When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A change engine oil light will come on.
Change your oil as soon as possible within the next 600 miles (1 000 km). It is possible that, if you are driving under the best conditions, the oil light
system may not indicate that an oil change is necessary for over a year. However, your engine oil and filter must be changed at least once a year and at
this time the system must be reset. Your dealer has trained service people who will perform this work and reset the system. It is also important to check
your oil regularly and keep it at the proper level.

It the system is ever reset accidentally, you must change your oil at 3,000 miles (5 000 km) since your last oil change. Remember to reset the oil life
system whenever the oil is changed.

How to Reset the Engine Oil Light System

Press the fuel information button on the Driver's Information Center until the Engine Oil Life is displayed. The Engine Oil Life System calculates when
to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is
required. If a situation occurs where you change your oil prior to a change engine oil light being turned on, reset the system.

To reset the change engine oil light, do the following:

RESETTING PROCEDURE

1. Turn the ignition key to "RUN" with the engine off. 
2. Fully push and release the accelerator pedal slowly three times within five seconds. 
3. Turn the key to "LOCK."

If the "CHANGE ENGINE OIL" light comes back on when you start the vehicle, the light has not reset. Repeat the procedure.

Malfunction Indicator Lamp > < Maintenance Required Lamp/Indicator|Description and Operation