isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 1215 > < SIR Disabling and Enabling Zones|Page 1213
Page 8
background image

4. Install the SIR fuse to the fuse block (1) located in the underhood fuse block.
5. Staying well away from all air bags, turn ON the ignition, with the engine OFF.

1. The AIR BAG indicator will flash 7 times.
2. The AIR BAG indicator will then turn OFF.

6. Perform the Diagnostic System Check - Vehicle, if the AIR BAG indicator does not operate as described.

SIR Disabling and Enabling Zone 5

SIR DISABLING AND ENABLING ZONE 5

DISABLING PROCEDURE

1. Turn the steering wheel until the vehicles wheels are pointing straight ahead.

IMPORTANT:  Refer to SIR Disabling and Enabling Zones before disabling the SIR system.

2. Turn OFF the ignition.
3. Remove the key from the ignition.
4. Access the inflatable restraint I/P module inline connector C208 above the driver side kick panel. Refer to Harness Routing Views.

5. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

SIR Disabling and Enabling Zones|Page 1215 > < SIR Disabling and Enabling Zones|Page 1213