isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Air Cleaner Fresh Air Duct/Hose|Service and Repair|Page 1020 > < Drive Belt Replacement (Without A/C)|Page 1014
Page 1
background image

Air Cleaner Fresh Air Duct/Hose: Service and Repair

AIR CLEANER RESONATOR AND OUTLET DUCT REPLACEMENT

REMOVAL PROCEDURE

1. Remove the air cleaner outlet duct.

2. Disconnect the atmospheric vent hose (2) from the air cleaner resonator (1).

3. Loosen the air cleaner resonator outlet duct clamp (4).
4. Remove the 2 air cleaner resonator bolts (1).
5. Complete the following in order to remove the air cleaner resonator (2) and outlet duct from the engine:

1. Lift upward on the assembly.
2. Disconnect the following:

-

The crankcase ventilation hose (3) from the camshaft cover

-

The outlet duct (4) from the throttle body

3. Remove the assembly (2) from the engine.

INSTALLATION PROCEDURE

Air Cleaner Fresh Air Duct/Hose|Service and Repair|Page 1020 > < Drive Belt Replacement (Without A/C)|Page 1014