isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Coolant Temperature Sensor/Switch (For Computer) > < Camshaft Position (CMP) Sensor Replacement-Intake|Page 2344

i-350 L5-3.5L (2006)

Page 2
background image

2. Install the exhaust CMP sensor into the cylinder head.
3. Install the exhaust CMP sensor bolt.

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten the CMP sensor bolt to 10 N.m (89 lb in).

4. Connect the engine wiring harness electrical connector (4) to the exhaust CMP sensor (5).

Coolant Temperature Sensor/Switch (For Computer) > < Camshaft Position (CMP) Sensor Replacement-Intake|Page 2344