i-350 L5-3.5L (2006)
6. Measure the distance between the two lines. The measurement (3) should be 14 - 15 mm (0.55 - 0.59 inch).
Important: It is normal for oil and air to leak out of the camshaft actuator when compressed air is applied. It is also normal for oil bubbles to
form on the camshaft sprocket surface due to porosity caused by the casting process. Do not replace the actuator due to this leakage.
The camshaft position actuator must be replaced if it does not unlock when air pressure is applied, does not lock when air pressure is removed, or
does not move within the 14 - 15 mm (0.55 - 0.59 inch).
