i-350 L5-3.5L (2006)
Fuel Filler Neck: Technical Service Bulletins
Body - New Metal Fuel Filler Tube W/O Flapper Door
2007 Service Bulletins
Information IB07-02-S002
Issue Date: APRIL 2007
Elimination Of Fuel Filler Tube Flapper Door
Affected Vehicles
2006 Isuzu Ascender
2006 Isuzu i-280/i-350 (TI)
New Metal Fuel Filler Tubes Without a Flapper Door
A revised style of fuel filler tube has changed materials from plastic to metal construction. On plastic fuel filler necks, the metal flapper was included as
a safe discharge point for static electricity. With the metal style of fuel filler tube, the entire neck serves as the static discharge point making the flapper
redundant.
IMPORTANT:
Do Not attempt to change the fuel filler tube because the flapper is not present. Replacement fuel filler tubes will not be equipped with the lapper.
Disclaimer
