i-350 L5-3.5L (2006)
vii. The switch is properly adjusted when there is 7 mm (0.028 in) clearance between the end of the switch barrel and the striker plate on the
brake pedal arm.
d. Connect the stop lamp switch electrical connectors (1).
e. Check the switch for proper operation.
CUSTOMER REIMBURSEMENT - For US
All customer requests for reimbursement of previously paid repairs for the recall condition will be handled by the Owner Relations Center not by service
facilities.
A Reimbursement Procedure and Claim Form are included with the customer letter.
CUSTOMER REIMBURSEMENT - Puerto Rico and the U.S Virgin Islands
Customer requests for reimbursement of previously paid repairs for the recall condition are to be submitted to the dealer or distributor by September 31,
2011.
When a customer requests reimbursement they must provide the following:
^
Proof of ownership at time of repair.
^
Original paid receipt confirming the amount of repair expense(s) that were not reimbursed a description of the repair and the person or entity
performing the repair.
Claims for customer reimbursement on previously paid repairs are to be submitted as required by ICS.
IMPORTANT:
Refer to the Isuzu Service Policies and Procedures Manual for specific procedures regarding customer reimbursement and the form.
CLAIM INFORMATION
1. Submit a claim using the table.
OWNER NOTIFICATION
