i-350 L5-3.5L (2006)
17. Remove the remaining control valve body bolts.
18. Important: Keep the control valve body level when lowering it from the transmission case. This will prevent the loss of checkballs located in the
control valve body passages.
Carefully begin to lower the control valve body down from the transmission case while simultaneously disconnecting the manual valve link from
the manual valve.
Installation Procedure
Ball Check Valves
1. Install the checkballs (1-7) in the valve body.
2. Important: Keep the control valve body level when raising it to the transmission case. This will prevent the loss of checkballs located in the
control valve body passages.
Install the control valve body to the transmission case while simultaneously connecting the manual valve link to the manual valve.