i-350 L5-3.5L (2006)
1. Install the power steering pump.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the power steering pump mounting bolts.
^
Tighten the power steering pump mounting bolts to 25 Nm (18 ft. lbs.).
3. Connect the power steering pressure hoses to the power steering pump.
^
Tighten the power steering pressure hose to 25 Nm (18 ft. lbs.).
4. Remove the drain pan from under the vehicle.
5. Connect the oil pressure sensor harness clip to the pump body.
6. Install the power steering pump pulley.
7. Install the drive belt.
8. Install the air cleaner assembly.
9. Bleed the power steering system.
10. Inspect the power steering system for leaks.
