i-350 L5-3.5L (2006)
Steering Gear: Service and Repair
Power Steering Gear Replacement
The content of this article/image reflects the changes identified in TSB
Bulletin No.: SB06-10-S001
SERVICE MANUAL UPDATE
Subject:
Revised Power Steering Gear Replacement
Models:
2006 Isuzu i280/i350
Power Steering Gear Replacement
Removal Procedure
1.
Raise and support the vehicle.
2.
Remove both of the front tire and wheel assemblies.
3.
Remove the engine protection shield if equipped.
4.
Disconnect the outer tie rod end from the steering knuckle.
5.
Place a drain pan to catch the fluid.
6.
Disconnect the power steering hose assembly from the steering gear.
7.
Remove the coupler clamp bolt from the intermediate shaft.
8.
Separate the intermediate shaft from the steering gear.
